ILoveToCreate Teen Crafts: Spring has Sprung Greeting Card

Here's a new project by my talented daughter Avalon for ILovetoCreate! She's a wizard with paper and this is such a fun idea!


Spring has Sprung Pop-up Card
Avalon Potter for ILovetoCreate Teen Crafts
“Teen crafted, Mom approved.

I have been noticing the subtle differences of spring appearing around me. The trees have started to regain their leaves and butterflies have started to flap their wings. My grandmother sent me a card with a spring flower and Easter treats, and my mom has been saying one of her catch phrases every day “spring has sprung!” I wanted to thank my grandmother for the wonderful card so I decided to use ILoveToCreate products to make her a three dimensional butterfly card. Before I send it to her I thought I would take a few pictures and write some instructions so you could make one too! I left one of the applique butterflies uncolored so she can iron it on something and have fun coloring it in herself!

Materials
Colored cardstock
3 Crafty Chica Iron-on Appliqués butterfly
Tulip Fabric Markers Bright
Tulip Soft Fabric Paint
3-D small square stickers

Tools
Paint brushes
Scissors

Instructions
1. Take two of the butterflies and color them in using the fabric paint or the fabric markers. (These butterflies will be used to decorate the front of the card.)

2. Cut your card stock so that both the butterflies can fit on the front.

3. Fold the longer length of card stock in half and score with bone folder. This is your card.

4. Cut a small strip from the same color paper as the card and fold in half. Use bone folder to score fold.

5. Find the center point of each length of paper from your center fold. Fold again using bone folder to score. When attached, this should form a square or rectangular shape to create your pop up feature.

6. Place two 3-D stickers on either side of the two small ends.

7. Use the 3-D stickers to attach the ends of the armature inside the center fold of the card. The two ends should meet in the center at the card fold. Place the armature directly in the middle of the card; make sure that the shape bends with the card as it closes. If it does not reposition it so that it will bend with the card. This is forming a square/rectangle that will fold with the card, when opened fully it should become a full square shape.

8. Use the 3-D stickers to attach the blank butterfly on the front of the armature. Test to make sure it still bends correctly.

9. Use the 3-D stickers again to attach the colored butterflies on the outside of the card.

10. Cut out a strip of a different color cardstock that will fit on the top of the inside of the card.

11. Use the 3-D stickers stencil and the big phat pink marker to write spring on this piece of cardstock.

12. Repeat step 10 using a different color cardstock and writing sprung instead.

13. Attach the spring cardstock to the middle of the top of the inside of the card. Use two 3-D stickers on top of each other instead of one on this.

14. Repeat step 12 with the sprung cardstock and attach to the bottom of the inside of the card. Add above sprung on the card itself not the sprung cardstock the word “has” using the yellow big phat marker and previous stencil.

15. To complete leave a note on the instructions on how to make the iron on butterflies so your friend or family member can color in and iron on the blank butterfly!

ILoveToCreate Teen Crafts: Pretty in Peeps Pendant

ILoveToCreate Teen Crafts: Pretty in Peeps Pendant
Mixed Media Jewelry Project
Margot Potter
“Mom crafted, kid approved.”
Copyright 2010 All Rights Reserved

I loves me some Marshmallow Peeps candies! How about you? Last year I bought a huge pile of them just to stack them up and stare at the fabulous colors. They’re so happy and fun filled. My daughter Avalon loves Peeps too. She loves them so much I can’t buy too many or she’ll turn into a Peep.

No, seriously.

I spent the better part of Easter season last year contemplating how to turn a Peeps candy into a bead. I thought about leaving one to sit for a few months and get nice and hard and then spraying it with a sealant...and heck that might work if you didn’t live in a 130 year old school house with a small mold problem. Methinks a moldy Peep bead would lack some appeal.

I finally settled on Sculpey Ultra Light polymer clay embellished with Crafty Chica paints and glitter and Tulip Glam It Up Studs. This could become a pin or a pendant or you could make a whole bunch of these on dowels and do a fun Peeps flower pot centerpiece like my edible bouquet from last year. I decided to make mine into a necklace and just added a bunch of springy Vintage and new Lucite and wood beads for a super cute necklace. If you really want to go to town, try making some Sculpey egg beads to coordinate...or add some polka dots and squiggles to large wooden beads...or do a collar of several Peeps that circle the neckline. I am not exaggerating in the least when I tell you that making these is so much fun, you’re going to look for reasons to make more!

Materials
Sculpey Ultra Light
Crafty Chica Little Chica Paints Red and White
3 Tulip Glam-It-Up Iron-On Studs Black
Crafty Chica Glitter Sunset Pink
Aleene’s Jewel-It Glue
Aleene’s Fast Grab Tacky Spray
Aleene’s Matte Finish Spray Sealant

Tools
Paint Brush
Polymer Clay Dedicated Toaster Oven
Sheet of Brown Kraft Paper

(To Make the Necklace:
Various Coordinated Beads in a Pattern That Makes a 16” or Longer Finished Length (I got the clear Lucite with green filament beads in NYC but here’s a source online and Beadin’ Path has a plethora of great vintage and new Lucite beads), 49 Strand .018 (or thicker) Beadalon Wire (always fill the holes of your beads with the wire), Beadalon EZ-Crimp Fancy Sterling Toggle Clasp, Mighty Crimp Tool and Wire Cutters)

1. Soften clay in your hands or by running it through a clay dedicated pasta machine until it is malleable. Use a real Peep as your guide to create a clay version. I bought some for research so I could get the size right...that’s my story and I’m sticking to it.

2. Use a sharp pointed object to create a hole in the middle of your rabbit’s head. This hole is threaded side to side so you can string the pendant on a necklace. Skip this step if you’re not making a bead.

3. Place rabbit on a sheet of Kraft paper on the baking tray and into a pre-heated 275 degree Toaster Oven. Watch the clay to be sure it doesn’t burn...it shouldn’t take very long to set. Mine took about 7 minutes...after I burned the first one. Oops.

4. Allow rabbit to cool. Mix red and white Crafty Chica paints to get a nice shade of pink. Paint rabbit. Allow to dry.

5. Place rabbit on a sheet of kraft or scrap paper. Spray with Aleene’s Tacky Spray. Pour a generous helping of pink glitter all over rabbit front and sides. Tap off excess and pour back into jar. Allow to dry.

6. Spray rabbit with Aleene’s Matte Finish Spray Sealant. Allow to dry.

7. Adhere the three Glam It Up studs to the face of your rabbit with the Jewel-It Glue. You’ll need to have a good dollop of glue so it fits into the recess on the stud. Use the handle of your paintbrush or a toothpick to remove any excess glue. Allow to dry.

Design Note: Do not eat this Peep.  It won't taste very good.  Trust me.